XCT-1™ Fire Retardant Coating and Insulator.
XCT-1™ Space Age Technology
Patent Pending
Now the number one fire retardant maker brings in a new class of fire retardant protection to meet the latest national fire codes for fire safety demands.
XCT-1 ™ has been in the making for eight years. Test after test by Universal Protective Technologies Labs show XCT-1™ to be a Class A Coating meeting Class 1 and 2 ratings and the most practical solution to insulating against heat and flame. Better than fire rated gypsum board, better than Monokote or Blaze Shield. Easier to handle. light weight and accessible where sheet rock is difficult to set. An aqueous based thermal product with no EPA issues.
Developed for the building trade to assist the National Fire Codes now in force. XCT-1™ can help reach the 1 hour and 2 hour ratings required code enforcement in many areas.
This unique compound of organic materials and fire retardant chemicals makes it the best fire retardant coating and insulator ever produced. It has no odor, environmentally safe and no problems with clean-up. Clean up with water and soap if needed.
Excellent qualities for ceilings, walls and
steel beams. Can be applied on sheet rock, galvanized steal, iron, wood and most surfaces. An
organic textured application that can be left as is or painted after
application.
Recommended for Commercial and Residential use. This unique product can
also be used as a fire stop compound for holes.
APPLICATIONS: COMMERCIAL, INDUSTRIAL AND RESIDENTIAL An exclusive formula flame and heat inhibiting compound. A SUPERIOR GRADE. Thermal coating rated Class "A", Class I & 2. Specifically formulated for maximum protection on ceilings and walls, steel beams and tank insulation where high fire and heat resistance is required. INTERIOR applications, meets and exceeds the surface burning characteristics for applied coatings. Can be applied to porous and non-porous surfaces. For other uses contact your distributor or corporate office. A system to achieve 1 and 2 hour ratings. Because it can be applied on most surfaces and hard to reach areas, XCT-1 solves many problems that must be addressed.
This product is sold pre-mixed in large and small quantities.
For large and small projects dry weight ready mix in 33 lb. bags.
Spread rate: Spread rate will
depend on the measure of fire protection desired. Example, 1/8" = 30 Minutes
1/4"= 1 hour . 1/2" or more = 2 hours. Heavier the coating higher the insulating factor. Spread
rate: 1/4" approx. 40 sq. ft. per 5 gallon mix.
Applied by hopper, roter or plaster or texture pump systems, portable augers and insulation type, typical for ceiling and wall textured compound applications. Can also be applied by hand trowel and other. As a fire stop seals cabling, plumbing and other holes.
Tested to meet:
Structural Steel Fireproofing Systems Manufacturer products are tested to ASTM E119, UL 263, UL 1479 and 1709
for interior and exterior structural fireproofing applications of structural steel members, decking, tanks and vessels. Also for wood structures ASTM-E 814, UL 1479, NFPA 255, UL 723,
ASTM-E 84 burning brand.
Flame Spread=5
Smoke Develop=0
Black Mold, mildew, fungi resistant. No solvents, halogens, asbestos or PBD's
Pre-Mixed shown at upper left, typical texture of product upper right. Typical steel beams and galvanized ceiling and ducts uncoated lower left. Lower right XCT-1 coating on structure.
Manufactured in USA
Made in USA
Manufactured and Sales.
Eastern USA Division
Universal Fire Shield, LLC
1 800-608-5699
400 Avenue R, SW, Winter Haven, Florida 33880
Universal Fire Shield, LLC
XCT-1 Thermal Coating